夹具设计毕业论文:活塞的加工工艺及夹具设计含论文,CAD图纸
![活塞的加工工艺及夹具设计[毕业论文+CAD图纸]](https://www.chilunren.com/wp-content/uploads/2021/02/1614244092-捕获.jpg)
活塞的加工工艺及夹具设计[毕业论文+CAD图纸]
![活塞的加工工艺及夹具设计[毕业论文+CAD图纸]](https://www.chilunren.com/wp-content/uploads/2021/02/1614244093-111.jpg)
摘 要
活塞零件加工工艺及钻床夹具设计是包括零件加工的工艺设计、工序设计以及专用夹具的设计三部分。在工艺设计中要首先对零件进行分析,了解零件的工艺再设计出毛坯的结构,并选择好零件的加工基准,设计出零件的工艺路线;然后对零件各个工步的工序进行尺寸计算,关键是决定出各个工序的工艺装备和切削用量;然后进行专用夹具的设计,选择设计出夹具的各个组成部件,如引导元件、夹紧元件、定位元件、夹具体与机床的连接部件以及其它部件;把夹具定位时产生的定位误差计算出来,分析夹具结构的合理性与不足之处,在以后设计中注意多加改进。
关键词:工艺,工序,切削用量,夹紧,定位,误差
Abstract
Shell parts processing technology and design of drilling jig design process design, including the parts processing process design and fixture three. In the process of design should first carries on the analysis to the components and parts of the process to understand the design of blank structure, and choose the good components the processing datum, designs the process routes of the parts; then the parts of each step of process dimension calculation, is the key to decide the craft equipment and the cutting dosage of each working procedure; design then the special jig, fixture for the various components of the design, such as the connecting part positioning device, clamping device, guide device, clamp and the machine tool and other components; the positioning error calculate fixture positioning, analysis of the rationality and deficiency of fixture structure, pay close attention to the improvement and design in later.
Keywords: process, process, cutting, clamping, positioning error
目 录
第1章 绪论 1
第2章 零件的分析 3
2.1 零件的形状 3
2.2 零件的工艺分析 4
第3章 工艺规程设计 5
3.1 确定毛坯的制造形式 5
3.2 基面的选择 5
3.3 制定工艺路线 5
3.3.1 工艺路线方案1 6
3.3.2 工艺路线方案2 6
3.3.3 工艺方案的比较与分析 7
3.4 选择加工设备和工艺装备 7
3.4.1 机床选用 7
3.4.2 选择刀具 8
3.4.3 选择量具 8
3.5 机械加工余量、工序尺寸及毛坯尺寸的确定 8
3.6 确定切削用量及基本工时 10
第4章 钻8-M16底孔夹具设计 13
4.1 夹具的夹紧装置和定位装置 13
4.2 夹具的导向 14
4.3 切削力及夹紧力的计算 15
4.4 钻孔与工件之间的切屑间隙 17
4.5 钻模板 18
4.6 定位误差的分析 18
4.7 钻套、衬套、钻模板设计与选用 19
4.8 确定夹具体结构和总体结构 21
4.9 夹具设计及操作的简要说明 22
结 论 23
参考文献 25
致 谢 27
第1章 绪论
毕业设计的目的
主要培养学生综合运用在大学阶段所学的知识来分析处理生产工艺问题的能力,使学生进一步巩固和完善有关理论知识,掌握机械加工工艺规程设计的方法,提高独立工作的能力,为将来做好专业技术工作打好基础。通过毕业设计,学生应该掌握以下技能。
熟练的运用机械制造技术、机械制造基础和其他有关主修课程中的基本理论,以及在生产实习中所学到的实践与理论知识,正确的分析和解决某一个零件在加工中基准选择、工艺路线的拟订以及工件的定位、夹紧,工艺尺寸确定等问题,从而保证零件制造的质量、生产率和经济性。培养制定零件机械加工工艺规程和分析工艺问题的能力,通过夹具设计的训练,进一步提高夹具结构设计(包括工程制图、设计计算等方面)的能力。熟悉有关标准和设计资料的主要内容,学会使用相关手册和数据库。在设计过程中培养学生独立工作的能力和严谨的工作作风。毕业设计的内容要求对所有零件图进行工艺分析。对零件图进行分析后,进行工艺路线的初步拟定、确定切削余量、绘制零件的毛坯图等。